What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 29.06.2025 00:54

One is “what exactly is in a ‘surge protector’ ? ”
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–14 [Omar Gharbi Omar Gharbi ]
What is lightning?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Global pandemic warning: Aspergillus deadly fungus mirrors HBO’s ‘The Last of Us’ - Times of India
2024–10–10[John johnson John Johnson ]
Now when you have a certain ac resistance, then a current flows in a loop.
These are simplified answers to the original question, and does not change anything I wrote above.
Where should Jac Caglianone hit in the Royals order? - Royals Review
Here is a simplified AC power diagram.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
He then describes the function of a fuse.
Little-known cells might be key to human brain’s massive memory - The Washington Post
The bolt then partially travels down the line to your home.
One
But… the neutral is now “floating” because of the 1 ohm resistance.
Is Apple Looking To Catch Up In AI With Big Deal? - Investor's Business Daily
Edit 2024–10.
This one hit behind the barn.
The other is “what does a “fuse” do?”
When should I use the best sunscreen for oily skin?
For this case there are devices called Metal oxide varistors (MOV).
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
The Strait of Hormuz is a vital route for oil. Closing it could backfire on Iran - AP News
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
There are two important concepts here.
Security Camera Footage Reveals How Dog Puts Away His Toys After Playing - AOL.com
A circuit breaker is similar, but is resettable.
At least they know the answer if they wanted it.
In schematic diagrams this is the symbol for a fuse:
First Sentence:
This is where the MOV conducts again, and dissipated the energy.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Are Hailee Steinfeld & Josh Allen getting married on May 31? - Buffalo Rumblings
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
[old diagram got deleted by accident]
How Can I get a taxi company to outsource their Dispatch services to me?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Barnstars:
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
but this device (an Inductor) … impedes the rapid changes in the current.
What are the consequences of sleeping with a married woman?
This is where this question deviates from being a 'generic' question, and becomes more specific.
These devices are installed between the “hot” and “neutral” and protective ground.
but I think this circuit , shows a few more pieces.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
He then describes Rainy Season and Lightning.
what exactly is a ‘surge’ protector?
eight
A fuse is a non-resetable over current circuit protector.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
So, the voltage could go up to 500 volts, and the fuse will not open up.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This device then solves the entire problem.
(Dc diagram shown, AC is similar).
nine
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
a photo is worth a thousand words.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
What does a fuse do?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
I post the exact comment here.
It seems Mohan does not understand the difference between a comment and an Answer.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
But it can get overloaded, and no longer works.
Because the load is inductive, the current lags the voltage.(by a bit).
the problem then depends on "how fast does the fuse operate?".
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is 'the assistant's answer'
There are three different concepts here that are getting confused.
An AC voltage/ current source, and an ac inductive load.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
It also is a device that limits the change in current flow.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
The third is lightning and “how it gets conducted into a home.”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–10–16 [ OO OLAOYE OYEBODE ]
Upvotes:
At one ohm, the resistor has a maximum of 1 watt power.
He then asserts :
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
so, what happens?
[image of Common-mode choke]
Can the fuse protect the electronic devices from lightning instead of a surge protector.